So after sharing pictures of the wall we painted in our guest bedroom on Twitter I had an influx of people asking about how we did it, so here it is!
The fabulous thing about this geometric paint style is that it looks so cool but its actually surprisingly quick and simple to do, its just a case of knowing what you need, and what you need to do, and hopefully I’ll cover all that in this post.
So the things you’ll need:
- Frog Tape – this is an absolute must, and this is the only thing where I feel really strongly about not cheaping out on. Regular masking tape will not give you completely clean lines as often paint will creep underneath the edges of the tape, but Frog Tape is treated with something that stops this from happening – I swear this post is not sponsored so please take my advice on this. You need the green tape (it also comes in yellow and orange, but its the green that you need for this), and for our wall we used the widest of the three sizes that B&Q keep in stock.
- Your paint choices – we opted for 3 colours and got 1L of each, but obviously you can have as many or few colours as you like – I’ve seen similar things on Pinterest where people just paint one colour and have the lines as the statement!
- Rollers/paint brushes, trays, dust sheets etc – y’know, the usual painting kit
Because our house is a new build, it already had a lovely fresh white wall for us to paint over, but if you’re not in the same position then make sure you paint your wall and let it dry properly before getting started on the pattern. Also don’t feel as though you have to have a white backdrop, you could do this with any colour, but if you’re going to use a darker background, you’ll want to do a coat of primer over your pattern before you start on the colours to make sure your background doesn’t show through.
So we started off by taping around the whole edge of the wall to create an outside border. This is totally optional but it gives it a nice edge and saves painful hours of cutting in so I do recommend it. Be sure to also tape around any sockets or switches.
Now the actual pattern we completely improvised. If you want to plan it before you start taping then that’s fine, but we actually were happier making it up as we went along, and the beauty of tape meant that if we did change our mind on a certain line, you just rip it back off and do it again. With a triangle pattern, the one thing I would say to keep an eye out for is that no three triangles have the same border line if you’re using three colours as we did, otherwise you’d end up with two triangles of the same colour touching, so just watch out.
Once we were happy with the pattern, we took a little bit of tape and wrote the colours on them so we could mark out which triangle was going to be which colour, again just to be sure that we didn’t end up with the same colour touching, and also just to make sure we had a good balance of the colours. Before you start to paint just double check that all of the tape is well stuck to the wall by smoothing over it all again.
Working one colour at a time, its just a case of filling in the gaps! When you’re only painting a few little shapes its amazing how much quicker it seems to take compared to painting a whole wall one single colour. Don’t worry about going over the edge of the tape a little bit with the paint, in fact you’re better off doing that to make sure you’ve filled right up to the edge of the shape.
Wait until you’ve painted in all of the colours, but be sure to peel the tape off before the paint has completely dried as this will prevent you pulling up any paint by accident with your tape. Start by peeling the pattern, and leave the outside border to last to peel, and most importantly take your time with the peeling. You don’t want to rush and end up flicking paint into the wrong section or getting tape stuck on wet paint.
Once you’ve peeled everything back off, you’re pretty much set, just allow plenty of time for the paint to dry fully before you do anything else to the wall!
So just to recap on the key points that I think are crucial to making this as perfect and painfree as possible:
- Frog Tape is a must, do not risk using regular masking tape
- You don’t have to overplan the pattern, in fact improvising can be easier
- Peel the tape off before the paint dries completely
- Having a border around the edge of the design saves a lot of time
For anyone wondering, we used Valspar paint in You’re Blushing, Angel’s Sigh and Petite Pirouette, as shown below:
Lottie Does 